“Waste Ink Full” at printer CANON Pixma IP1000
The step 2: permanent Software (the method 1)
1. Connect the USB cable & incited Printer
2. Open “General Tools for iP1000″, download in
3. Choose your USB PORT
4. Choose SET DESTINATION - 1 necessarily the method already reset the printer, but whether why the printer returned again blinking if the cable power him had been removed.
So try the 2nd method that is with ServiceTool him IP1500
The step 2: Permanen Software (the method 2)
1. Connect the USB cable & incited Printer
2. Open “General Tools for iP1500″, download in http://download.dewatahost.com/index.php? Option=com content&task=view&id=15&Itemid=27
3. Choose your USB PORT.
4. Click CLEAR WASTE INK COUNTER - played
5. Click CLEAR WASTE INK COUNTER - PLATEN this method already could reset printer & waste ink counter him. Must be known. Before doing the re-set the waste ink counter, better be straightened you-true cleaned the foam of the absorber of the outcast's ink (was blackmailed, was washed, or was made the sewerage system external), if not later his disposal ink would
Monday 29 September 2008
Waste Ink Full "CANON Pixma IP1000" Temporary
Masalah “Waste Ink Full” di printer CANON Pixma IP1000
This happened because every time we printed then the system printer will record and if the number that we print achieved the limit that was determined then will happen over load that was marked LED light was switched on in a changing manner or was mentioned with BLINKING. If being like this automatic printer we must be carried by us to Service center closest.
Along with was several methods to fix this problem. The method me-re-the set of the problem of “Waste Ink Full” to CANON Pixma iP1000 ================================================
Step 1: the Service of the Manual method (the method 1)
1. Freely the POWER cable and USB.
2. Open the door printer and PRESS+HOLD the POWER switch
3. Put again on the POWER cable
4. Close the door printer, free the POWER. switch
5. Lighted printer as usual & necessarily already not blinking again
The step 1: the Service of the Manual method (the method 2)
1. Freely the POWER cable and USB.
2. PRESS+HOLD the POWER switch
3. Put again on the POWER cable
4. Freely the POWER. switch
5. Turn on printer as usual & necessarily already not blinking again.
This happened because every time we printed then the system printer will record and if the number that we print achieved the limit that was determined then will happen over load that was marked LED light was switched on in a changing manner or was mentioned with BLINKING. If being like this automatic printer we must be carried by us to Service center closest.
Along with was several methods to fix this problem. The method me-re-the set of the problem of “Waste Ink Full” to CANON Pixma iP1000 ================================================
Step 1: the Service of the Manual method (the method 1)
1. Freely the POWER cable and USB.
2. Open the door printer and PRESS+HOLD the POWER switch
3. Put again on the POWER cable
4. Close the door printer, free the POWER. switch
5. Lighted printer as usual & necessarily already not blinking again
The step 1: the Service of the Manual method (the method 2)
1. Freely the POWER cable and USB.
2. PRESS+HOLD the POWER switch
3. Put again on the POWER cable
4. Freely the POWER. switch
5. Turn on printer as usual & necessarily already not blinking again.
Subscribe to:
Posts (Atom)