Masalah “Waste Ink Full” di printer CANON Pixma IP1000
This happened because every time we printed then the system printer will record and if the number that we print achieved the limit that was determined then will happen over load that was marked LED light was switched on in a changing manner or was mentioned with BLINKING. If being like this automatic printer we must be carried by us to Service center closest.
Along with was several methods to fix this problem. The method me-re-the set of the problem of “Waste Ink Full” to CANON Pixma iP1000 ================================================
Step 1: the Service of the Manual method (the method 1)
1. Freely the POWER cable and USB.
2. Open the door printer and PRESS+HOLD the POWER switch
3. Put again on the POWER cable
4. Close the door printer, free the POWER. switch
5. Lighted printer as usual & necessarily already not blinking again
The step 1: the Service of the Manual method (the method 2)
1. Freely the POWER cable and USB.
2. PRESS+HOLD the POWER switch
3. Put again on the POWER cable
4. Freely the POWER. switch
5. Turn on printer as usual & necessarily already not blinking again.
No comments:
Post a Comment