“Waste Ink Full” at printer CANON Pixma IP1000
The step 2: permanent Software (the method 1)
1. Connect the USB cable & incited Printer
2. Open “General Tools for iP1000″, download in
3. Choose your USB PORT
4. Choose SET DESTINATION - 1 necessarily the method already reset the printer, but whether why the printer returned again blinking if the cable power him had been removed.
So try the 2nd method that is with ServiceTool him IP1500
The step 2: Permanen Software (the method 2)
1. Connect the USB cable & incited Printer
2. Open “General Tools for iP1500″, download in http://download.dewatahost.com/index.php? Option=com content&task=view&id=15&Itemid=27
3. Choose your USB PORT.
4. Click CLEAR WASTE INK COUNTER - played
5. Click CLEAR WASTE INK COUNTER - PLATEN this method already could reset printer & waste ink counter him. Must be known. Before doing the re-set the waste ink counter, better be straightened you-true cleaned the foam of the absorber of the outcast's ink (was blackmailed, was washed, or was made the sewerage system external), if not later his disposal ink would
No comments:
Post a Comment